FMS-207 SE I4.0 - Robotized screwing

The seventh station integrates robotics technology. An industrial robot is used to screw in the four bolts supplied by the previous station. The robot has a tool attached with a pneumatic gripper and an electric screwdriver and the station table includes material stores (with capacity for 6 lids and 6 shafts). 

In addition to the screwing operation, the robot can also be used for assembly and dismantling operations, plus exchanging material between stores. These applications support an extensive range of possible programs for the robot controller which significantly extends its didactic capacities.

Furthermore, this station includes the following Industry 4.0 technologies:

• - Robotics: this allows choosing between integrating a collaborative, or standard, industrial robot.
• - HMI: this station includes an HMI screen.
• - Identification systems (RFID): the antenna for reading/writing the RFID tag located on the transport pallet is located in the station's transfer section.

See the technologies that are common to all the stations