Control Modules, Sensors and Electrical Accessories - Components
HYDROTRAINER-200 offers an extensive selection of components to meet all your hydraulic / electrohydraulic learning needs and create your custom compositions.
Power supply 24 V
HY9040-XX*:
- Voltaje input: 110V - 240VAC.
- Output: 24VDC / 5A.
- Short-circuit protection.
- Input switch and LED display.
- Built-in power cable.
- ø4 mm terminals for snap conection cables.
- Insulating box with screen printed lid.
_*Configurable part number. More information: How To Order or Product configurator._
Set of pushbuttons
HY9042:
- 2 pushbuttons with spring return.
- 2-position selector.
- 4 mm female electrical safety connectors.
- Insulating box with screen printed lid.
Electrical inputs one push-button
HY9101:
- 1 pushbutton with spring return.
- 4 mm female electrical safety connectors.
- Insulating box with screen printed lid.
Set of 3 relays
HY9041:
- It includes three relays with coil 24V and 4 switchable contacts.
- LED activated relay display.
- 4 mm female electrical safety connectors.
- Insulating box with screen printed lid.
Set of cables with electric connector 4mm.
HY9046:
- 5 red cables 1.5 m.
- 5 black cables 1 m.
- 10 yellow cables 0.5 m.
- 5 blue cables 0.25 m
Set of cables with electric connector. 20 units
HY9111:
- 10 red cables 1.5 m.
- 10 black cables 1 m.
Set of connectors + cable for solenoids
HY9272:
- Male connectors 4 mm.
- Cable 1.5 m.
- Ready to connect in solenoid vale coils.
- It includes 3 units (1 black connector and 2 grey connectors).
- LED indicators.
Electric end of stroke
HY9231:
- Retractable roller driven.
- 1 contact NO.1 contact NC.
- Transparent body and roller with reversible position.
- 4 mm female safety connectors.
Indicator light assembly
HY9043:
- Includes 8 indicator lights and a beeper.
- It has additional female sockets for power supply distribution.
- 4 mm female electrical safety connectors.
Electric meter with pre-selection
HY9033:
- Includes counting and countdown inputs.
- Power supply: 24 V.
- Pre-selected electromechanics.
- Manual or electric zero clear.
- Switched contact.
- ø4 mm female electrical safety connectors.
Set of 2 timed relays
HY9057:
- Installed in box made of an insulating material with a system for securing to the support panel and ISO serigraph.
- Includes two timed relays: one for connection and the other for disconnection.
- With 24 V coil and switch contact.
- It has an LED timer state indicator.
- Programmable time between 0.1 sec and 1 hour.
- 4 mm electrical safety connections.
Benchtop PLC module
PN4143-XX-XX*:
Benchtop PLC module. Available for different PLC brands:
- Alpha2 AL2-24MR-D (15 inputs and 9 outputs to relay).
- Siemens S7-1200 (8 digital inputs, 6 digital outputs to relay and 2 analogue inputs).
- Allen Bradley Micro830 (10 digital inputs, 6 digital outputs to relay and 2 analogue inputs).
Includes:
- All the inputs and outputs are accessible by female quick connection sockets for cables with 4 mm safety terminals.
- Simulation of analogue and digital inputs by potentiometers and switches.
- 24Vdc power supply.
- LED output activation indicator.
- Power supply: 100-240Vac
- Built-in power cable.
- _Programming tools not included. Consult for other PLC brands._
_*Configurable part number. More information: How To Order or Product configurator._
Pressure switch
HY9229:
- It emits an electrical signals when the preset pressure value is reached.
- Output via switched potential-free contact.
- Pressure adjustable between 0 - 40 bar. Max. Pressure: 125bar.
*Cable for SAI9271 pressure switch required.
Cable for pressure switch
HY9271:
- Ready to connect to pressure switch.
- Male connectors ø4 mm.
- Cable length: 1.5 m.
- LED indicators.
In line pressure filter
HY9287:
- Oil filter to fit at the high pressure input of the user circuit.
- 10 µ cartridge. B10=75. Max. Pressure: 10 bar.
- With electrical clogging indicator.
- Includes electrical connector with two LEDs (red, green) and output switched by free voltage contact.
- On base plate with three quick-fit male connectors R 1/4”.
Inductive sensor
HY9276:
- Adjustable detection distance: 2 mm.
- M12, possibility of adjusting the detection distance.
- Transistorised output, with indicator LED.
- Three socket safety wiring on screen printed plate for correct connection.
Capacitive sensor
HY9277:
- Adjustable detection distance: 4 mm.
- M12, possibility of adjusting the detection distance.
- Transistorised output, with indicator LED.
- Three socket safety wiring on screen printed plate for correct connection.
Optical sensor
HY9278:
- Adjustable detection distance: 100 mm.
- M18, possibility of adjusting the detection distance.
- Transistorised output, with indicator LED.
- Four socket safety wiring on screen printed plate for correct connection.
Power supply module for two proportional coils
HY9309-XX*:
- Electronic unit for entering the electric signals to the proportional valves. Manual control.
- Potentiometer for controlling the output intensity to coils a or b.
- Dither frequency on/off switch and Dither frequency value adjustment.
- I max. = 0.9 A per coil.
- 2 ammeters for displaying the current via coils a or b.
- Overload electronic internal protection.
_*Configurable part number. More information: How To Order or Product configurator._
Set of connectors for proportional coils
HY9303:
- Connectors with LED indicators (screen type). Long. 1.5 m.
- It includes 2 units (1 grey connector and 1 black connector).
Digital amplifier cards PZD-PWD for proportional coils
HY9310:
- Electronic unit for entering the electric signals to the proportional valves. Automatic control.
- For the control and regulation of systems with proportional solenoid valves.
- Controlled by microprocessor without potentiometers, input, reading and graphic display of parameters by PC. Internal and external set point introduction possibility.
- Acceleration / deceleration slopes.
- PID digital regulator.
- ø4 mm security terminals.
- 1 Software license included for PC. 1 communication cable included (PC – card).
Generator of external setpoints
HY9311:
- Electronic unit for entering the electric control setpoint to the digital amplifier cards SAI9310.
- With multi-turn potentiometer, output current 0 ~ ±10 VDC.
- In screen printed insulating box, with connections by means of ø4 mm coloured safety sockets.
Tachometer
HY9312:
- For mounting on the motor and obtaining a voltage value in proportion with the rotation speed (speed control).
- Output 0 - +/-10 VDC. Bidirectional.
- With coupling for piston motor SAI9220.
- ø4 mm security terminals.
Analogue position transducer for motor
HY9313:
- For mounting on the motor and obtaining a voltage value in proportion to the rotation angle. (Position control).
- Output 0 ~ 10 VDC. Bidirectional.
- R = 4.7 KΩ.
- With coupling for piston motor SAI9220.
- ø4 mm security terminals.
Pressure transducer with digital indicator
HY9314:
- Converts the pressure value at any point into a proportional electrical signal (V).
- Pressure range = 0 ~ 64 bar.
- Output 4 ~20 mA.
- Built-in pressure switch function.
Product configurator
Do you want to request a quote on this product and get the specifications and technical descriptions of it?
Configure your ideal system through our product configurator and get all the related information in just a couple of clicks.