Go back to HYDROMODEL-200 
|
 CONTROL MODULES, SENSORS AND ELECTRICAL ACCESSORIES
• SAI9309 - Power supply module for two proportional coils
 |
- Potentiometer for controlling the output intensity to coils a or b.
- Dither frequency on/off switch and Dither frequency value adjustment.
- I max. = 0.9 A per coil.
- 2 ammeters for displaying the current via coils a or b.
- Overload electronic internal protection.
|
• SAI9303 - Set of connectors for proportional coils
 |
- Connectors with LED indicators (screen type). Long. 1.5 m.
- It includes 2 units (1 grey connector and 1 black connector).
- Indication on screen of light intensity proportional to the intensity value.
|
• SAI9040 - Power supply
 |
- Voltage input 110V - 240VAC.
- Output: 24VDC / 5A.
- Short-circuit protection.
- Input switch and LED display.
- Built-in power cable.
- ø4 mm female electrical safety connectors.
- Insulating box with screen printed lid.
|
• SAI9042 - Set of pushbuttons
 |
- 2 pushbuttons with spring return.
- 2-position selector.
- ø4 mm female electrical safety connectors.
- Insulating box with screen printed lid.
|
• SAI9041 - Set of 3 relays
 |
- It includes three relays with coil 24V and 4 switchable contacts.
- LED activated relay display.
- ø4 mm female electrical safety connectors.
- Insulating box with screen printed lid.
|
• SAI9231-R / SAI9231-L - Electric end of stroke (right / left)
 |
- Retractable roller driven.
- R=right. L=left.
- 1 contact NO.1 contact NC.
- Transparent body and roller with reversible position.
- ø4 mm female safety connectors.
|
• SAI9272 - Set of connectors + cable for solenoides
 |
- Male connectors ø4 mm.
- Cable 1.5 m.
- Ready to connect in solenoid vale coils.
- It includes 3 units (1 black connector and 2 grey connectors).
- LED indicators.
|
• SAI9046 - Set of cables with electric connector 4 mm.
 |
- 5 red cables 1.5 m.
- 5 black cables 1 m.
- 10 yellow cables 0.5 m.
- 5 blue cables 0.25 m.
|
|
Go back to HYDROMODEL-200
