Go back to HYDROMODEL-200 
|
 FLOW VALVES
• SAI9439 - Proportional flow control valve with pressure compensation
 |
- Coil-operated 24Vcc / I nominal: 0.8A.
- Max. Pressure: 10bar.
* Connector for SAI9303 coil required
|
• SAI9422 - Manual shut-off valve, 2 way
 |
- Opens or closes the oil flow with an activation lever.
- Manual rotary actuation.
- Max. Pressure: 10bar.
|
• SAI9423 - Piloted check valve
 |
- Normally it allows the oil to pass in one direction only, but it does it in both directions when there is pressure in the pilot connection.
- Max. Pressure: 10bar.
|
• SAI9415 - One way restrictor
 |
- It enables the oil to flow on one direction only.
- Max. Pressure: 10bar.
|
• SAI9416 - Two way flow control valve
 |
- It enables the oil flow in both directions to be adjusted.
- Two-way flow control valve, with two ports, needle. Manual adjustment by rotary knob.
- Max. Pressure: 10bar.
|
• SAI9421 - One way flow control valve
 |
- It enables the oil flow in one direction to be adjusted and flow to be unrestricted in the opposite direction.
- One-way. Manual adjustment by rotary knob.
- Max. Pressure: 10bar.
|
• SAI9424 - Flow control valve with pressure compensation
 |
- It enables the flow to be adjusted regardless of the pressure values at the input and output.
- Manual regulation by rotary knob.
- Max. Pressure: 10bar.
|
• SAI9468 - Flow divider
 |
- Flow divider valve: it divides the inlet flow into two equal parts.
- Max. Pressure: 10bar.
|
• SAI9469 - Circuit selector with logic function “OR”
 |
- Max. Pressure: 10bar.
|
|
Go back to HYDROMODEL-200
