- Voltage input 110V - 240VAC.

- Output: 24VDC / 5A.

- Short-circuit protection.

- Input switch and LED display.

- Built-in power cable.

- ø4 mm terminals for snap connection cables.

- Insulating box with screen printed lid.

- 2 pushbuttons with spring return.

- 2-position selector.

- Electric female connectors ø4 mm.

- Insulating box with screen printed lid.

- 1 pushbutton with spring return.

- Electric female connectors ø4 mm.

- Insulating box with screen printed lid.

- It includes three relays with coil 24V and 4 switchable contacts.

- LED activated relay display.

- Electric female connectors ø4 mm.

- Insulating box with screen printed lid.

- 5 red cables 1.5 m.

- 5 black cables 1 m.

- 10 yellow cables 0.5 m.

- 5 blue cables 0.25 m.

- Male connectors ø4 mm.

- Cable 1.5 m.

- Ready to connect in solenoid vale coils.

- It includes 3 units (1 black connector and 2 grey connectors).

- LED indicators.

- Retractable roller driven.

- 1 contact NO.1 contact NC.

- Transparent body and roller with reversible position.

- Female connectors ø4 mm.

- Includes 8 indicator lights and a beeper.

- It has additional female sockets for power supply distribution.

- 4 mm female electrical safety connectors.

- Includes counting and countdown inputs.

- Power supply: 24 V.

- Pre-selected electromechanics.

- Manual or electric zero clear. 

- Switched contact.

- 4 mm female electrical safety connectors.

- Installed in box made of an insulating material with a system for securing to the support panel and ISO serigraph.

- Includes two timed relays: one for connection and the other for disconnection.

- With 24 V coil and switch contact.

- It has an LED timer state indicator.

- Programmable time between 0.1 sec and 1 hour.

- 4 mm electrical safety connections.

- Module for table mounting or panel, including the Alpha2 AL2-24MR-D controller (15 inputs and 9 outputs to relay).

- Includes simulation of analog / digital inputs.

- Includes 24Vdc power supply.

- Programming software and instructions manual.

- Includes LED output activation indicator.

- Power supply: 100-240Vac.

- Built-in power cable.

• SAI9367 - Benchtop Siemens PLC module

Benchtop module or for panel which includes a Siemens S7-1200 (1212C CPU) PLC with 8 digital inputs, 6 digital outputs to relay and 2 analogue inputs.

• SAI9121 - Benchtop Allen Bradley PLC module

Benchtop module or for panel which includes an Allen Bradley Micro830 PLC with 10 digital inputs, 6 digital outputs to relay and 2 analogue inputs.

- All the inputs and outputs are accessible by female quick connection sockets for cables with 4 mm safety terminals.

- Includes simulation of analogue and digital inputs by potentiometers and switches.

- Includes LED output activation indicator.

- Includes 24Vdc power supply.

- Power supply: 100-240Vac

- It emits an electrical signals when the preset pressure value is reached.

- Output via switched potential-free contact.

- Pressure adjustable between 0 - 40 bar. Max. Pressure: 125bar.

*Cable for SAI9271 pressure switch required.

- Ready to connect to pressure switch.

- Male connectors ø4 mm.

- Cable length: 1.5 m.

- LED indicators.

- 10 µ cartridge. B10=75. Max. Pressure: 10 bar.

- With electrical clogging indicator.

- Includes electrical connector with two LEDs (red, green) and output switched by free voltage contact.

- On base plate with three quick-fit male connectors R 1/4".

- Adjustable detection distance: 2 mm.

- M12, possibility of adjusting the detection distance.

- Transistorised output, with indicator LED.

- Three socket safety wiring on screen printed plate for correct connection.

- Adjustable detection distance: ø4 mm.

- M12, possibility of adjusting the detection distance.

- Transistorised output, with indicator LED.

- Three socket safety wiring on screen printed plate for correct connection.

- Adjustable detection distance: 100 mm.

- M18, possibility of adjusting the detection distance.

- Transistorised output, with indicator LED.

- Four socket safety wiring on screen printed plate for correct connection.

- Electronic unit for entering the electric signals to the proportional valves. Manual control.

- Potentiometer for controlling the output intensity to coils a or b.

- Dither frequency on/off switch and Dither frequency value adjustment.

- I max. = 0.9 A per coil.

- 2 ammeters for displaying the current via coils a or b.

- Overload electronic internal protection.

- Connectors with LED indicators (screen type). Long. 1.5 m.

- It includes 2 units (1 grey connector and 1 black connector).

- Electronic unit for entering the electric signals to the proportional valves. Automatic control.

- For the control and regulation of systems with proportional solenoid valves.

- Controlled by microprocessor without potentiometers, input, reading and graphic display of parameters by PC. Internal and external set point introduction possibility.

- Acceleration / deceleration slopes.

- PID digital regulator.

- ø 4 mm security terminals.

- 1 Software license included for PC. 1 communication cable included (PC – card).

- Electronic unit for entering the electric control setpoint to the digital amplifier cards SAI9310.

- With multi-turn potentiometer, output current 0 ~ ±10 VDC.

- In screen printed insulating box, with connections by means of ø4 mm coloured safety sockets.

- For mounting on the motor and obtaining a voltage value in proportion with the rotation speed (speed control).

- Output  0 - +/-10 VDC. Bidirectional.

- With coupling for piston motor SAI9220.

- ø 4 mm security terminals.

- For mounting on the motor and obtaining a voltage value in proportion to the rotation angle. (Position control).

- Output 0 ~ 10 VDC. Bidirectional.

- R = 4.7 KΩ.

- With coupling for piston motor SAI9220.

- ø4 mm security terminals.

- Converts the pressure value at any point into a proportional electrical signal (V).

- Pressure range = 0 ~ 64 bar.

- Output 4 ~20 mA.

- Built-in pressure switch function.