- Rod normally retracted.

- Stainless steel construction Diameter 20mm. Stroke 50mm.

- Rubber cushion.

- Stainless steel construction. Exterior diameter 20mm. Stroke 100mm.

- Rubber cushion.

- Rail to house end-of-stroke auto switches.

- Diameter 20mm. Stroke 100mm.

- Adjustable air cushion with built-in rail for magnetic detection.

 - Stainless steel construction. Exterior diameter 15mm. Stroke 100mm.

- Magnetic coupling with high holding force.

- Speed 50 to 400mm/s.

- Includes 2 solid state magnetic sensors (SAI2128; D-F7PL).

- Exterior diameter 16mm. Stroke 100mm. Mechanically-driven.

- Speed 100 to 150mm/s.

- Option to mount detectors on either side of the casing.

- Includes 2 solid state, 3-wire D-M9PL sensors.

- Stroke: 100mm.

- Rod with 4 support points on friction bushing.

- Speed 50 to 500mm/s.

- Rubber cushion.

- Includes 2 solid state magnetic sensors (D-Y7PL).

- Diameter 20mm. Stroke 50mm.

- Resolution: 0,1mm.

- Measurement available for entire length of stroke.

- Direct connection to counter.

- Possibility of PLC connection.

- Incorporates two flow regulators.

* Counter not included SAI2121.

- Linear cylinder and rotating actuator combined with vacuum pad terminal.

- Linear and rotating movement, independent or simultaneous.

-Diameter 32mm, stroke 25mm.

- Angle of rotation: 180º.

- Incorporates 4 flow regulators.

- Includes 4 solid state magnetic sensors (SAI2128; D-F7PL).

- Two cylinders, one actuator and another as a load.

- Bore 16 and 20mm, stroke 50mm.

- Using flow regulators the load applied can be varied.

- Includes two reed type magnetic sensors (D-C73L).