Go back to PNEUTRAINER-400 
|
 ASSEMBLY PANELS AND ACCESSORIES
• SAI2080 - Horizontal mounting panel
 |
- External dimensions: 700x560x25mm*. It is supported on non-slip legs. Can be converted into a vertical panel using a support bracket set (see SAI2028).
*Other dimensions available on request.
|
• SAI2064 - Vertical mounting panel for 2 work positions
 |
- External dimensions: 1150x760x410mm*. Allows work to be carried out on both sides, optimizing investment and space.
*Other dimensions available on request.
|
• SAI2065 - Rolling table with twin-post
 |
- The entire rolling frame system may be disassembled for transportation.
- The vertical panel means you can work on both sides.
- Panel dimensions: 1150x760x25mm.
- It has a laminated top for horizontal work, 1200x800mm.
- The lower section features a 1200x600mm metal shelf supporting the component storage drawers, the silent compressor, etc.
- 4 high-load wheel support, 2 with brake and 2 without.
- Total dimensions: 1200x800x1700mm.
|
• SAI2028 - Support bracket set
 |
- With non-slip legs, allowing the user to convert the horizontal mounting panel into a vertical panel.
|
• Storage drawer blocks for rolling table
 |
• SAI2066 - without lock
• SAI2074 - with lock
- Compact 4-drawer block with slide guides to house the component trays.
- External dimensions: 500x725x650mm.
|
• Silent compressor
 |
• SAI2088 - Power supply 230VAC
• SAI2520 - Power supply 110VAC
- Model ICO-P50.
- Two-phase power supply.
- Flow rate: 50l/min.
- Maximum pressure: 0,8MPa.
- Low noise level: 40dB.
- Reservoir: 9 l.
- Weight: 21kg.
*Other models available on request.
|
• SAI2068 - Schematic clip device
 |
- Allows schematics to be attached in DIN-A4 format on the panel.
|
• SAI4-2089 - Cable holder fitting
 |
- This supports orderly storage of connection cables.
|
|
Go back to PNEUTRAINER-400
