The combination of various products in SMC International Training product range that provide solutions to the most common needs in pneumatics / transparent hydraulics.
• SAI7400 |
Pneumatics / transparent hydraulics pack |
This pneumatics / transparent hydraulics pack is designed to:
• Aquire knowledge.
• Design and simulate the circuits.
• Test and operate the real circuits with more than 30 activities available.
Composition of the pack (SAI7400)
Referencia |
Descripción |
Cantidad |
SAI2065 |
Rolling table with twin-post |
1 |
SAI2074 |
Drawer unit for rolling table with lock |
2 |
SAI2281 |
PNEU-401: Basic pneumatics kits |
2 |
SAI9500 |
MOD-201: Transparent hydraulic level I kit |
1 |
SAI9501 |
MOD-202: Transparent hydraulic level II kit |
1 |
SAI9410 |
Portable hydraulic pump for transparent hydraulic |
1 |
SAI9411 |
Oil with special red colouring |
1 |
SAIU020-001 |
SINGLE USE licence for the eLEARNING-200 pack of courses |
6 |
SAI2252 |
AutoSIM-200, 1 educational license |
1 |
SAI7401 |
Poster of the composition PNEU-401 |
1 |
SAI7402 |
Poster of the compositions MOD-201 and MOD-202 |
1 |
List of activities for PNEU-401, MOD-201 and MOD-202
PNEUMATICS |
• Direct control of a single acting cylinder. |
• Indirect control of a single acting cylinder. |
• Indirect control of a double acting cylinder. |
• Control of a double acting cylinder with bistable valve. |
• Control of a double acting cylinder from two independent locations. |
• Control of a double acting cylinder from two simultaneous locations. |
• Regulation of the speed of a double acting cylinder. |
• Increase in the speed of a double acting cylinder.. |
• Memory function with a monostable valve. |
• Detection and control of the position of a cylinder. |
• Delay in a control signal. |
• Activation of a control signal according to the pressure. |
• Stamping device. |
• Frame press. |
• Holding device. |
• Stamping wooden parts. |
• Distribution of boxes. |
• CControl of casting ladle. |
• Warehouse clearance. |
• Distribution and separation of parts. |
TRANSPARENT HYDRAULICS |
• Gear pump, lock up valve (or flow valve here with the same function), pressure gauge. |
• Pressure limiter valve. |
• Stopcock (distributor). |
• Single acting cylinder. |
• Double acting cylinder. |
• Check valve. |
• Flow valve (choke valve). |
• Flow rate regulation valve. |
• Resistance to fluid passage. |
• Differential circuit. |
• Back pressure. |
• Check valve with choke. |
• Check valve with unblocking. |
Complete laboratory
Proposal for the pneumatics / transparent hydraulics complete laboratory: 4 stations with 2 workstations (up to 24 students).
• SAI7403 |
Complete laboratory - pneumatics / transparent hydraulics
|
• Composition for the complete laboratory (SAI7403):
Referencia |
Descripción |
Cantidad |
SAI7400 |
Pneumatics / transparent hydraulics pack |
4 |
SAI2254 |
autoSIM-200. 16 educational licenses |
1 |
SAI7377 |
Posters of pneumatic symbols |
1 |
SAI7390 |
Posters of hydraulic symbols |
1 |

|