Instructor portal

Download this Animation about an Extended Simple Effect Cylinder

Enter the following link to download an animation about the pneumatic simple effect cylinder that is extended in standby position.
[Read More]

The graphic difference between NO valves and NC valves

Download this animation of two 2/2 solenoid valves, one normally open (NO) and one normally closed (NC), that will help you to understand the difference between them.
[Read More]

Download this Directional Control Valves Poster

Click on the link below and download this poster! The poster explains the concepts related to pneumatic directional control valves.
[Read More]

Download the Animation about this Complete Vacuum Ejector (ZM)

Download the animation to learn more about how this vacuum ejector works. This vacuum ejector includes a valve and detector in addition to a filter and muffler.
[Read More]

Valve Manifold Design with Real Industrial Options

Download this software to configure different types of valve manifolds and their options. This configurator will provide you with knowledge and understanding of the real industrial possibilities these types of components offer.
[Read More]

Download the 5/3 Closed-Center Valve Animation

At SMC International Training, we want to offer you tools that can be useful in different training environments. This time we offer you the option to download a 5/3 closed-center valve animation.
[Read More]

Download This “Pneumatic Actuators” Poster

Enter and download this poster about pneumatic actuators. It includes the most common pneumatic actuators types, a cylinder mounting types and the basic components of a linear actuator.
[Read More]

Free access to the "SMC-108 – Sensors Technology" course from eLEARNING-200

From SMC International Training, we want to provide you free access to the "SMC-108 – Sensors Technology” for 3 days.
[Read More]

Find out how a single acting pneumatic cylinder works internally

At SMC International Training, we want to offer you the tools that can be useful in different training environments. We have a new animation about a single acting pneumatic cylinder.
[Read More]

The best way to understand how a rod-less cylinder works

At SMC International Training, we want to offer you the tools that can be useful in different training environments. Our animation about a rod-less cylinder will help you to understand how it works and how this type of cylinder makes its movement.
[Read More]

Download energy-saving software

At SMC International Training, we want to offer you tools that can be useful in different training environments. We currently have an opportunity for you to download our energy-saving software.
[Read More]

Download this air filter animation

At SMC International Training, we want to offer you the tools that can be useful in different training environments. We have a new animation about an air filter.
[Read More]

The most visual way to understand the air cushioning

At SMC International Training, we want to offer you the tools that can be useful in different training environments. We have a new animation about a compact cylinder with air cushioning.
[Read More]

Free access to the "SMC-103 – DC Electricity" course from eLEARNING-200

3 days of free access to the eLEARNING-200 course SMC-103 – DC Electricity!
[Read More]

Download this animation about pneumatic circuit with vacuum generation

At SMC International Training, we want to offer you the tools that can be useful in different training environments. We have a new animation about a pneumatic circuit for a vacuum ejector.
[Read More]

Select & calculate the performance of our electric solutions

At SMC International Training, we want to offer you the tools that can be useful in different training environments. This time we offer you the option to download the updated version of the electric actuator selector software.
[Read More]

Download the non-rotating double power cylinder animation

We have a new animation about a non-rotating double power cylinder. This animation will help you understanding how this element works.
[Read More]

How does a Pilot Operated Regulator work?

We have a new animation about a Pilot Operated Regulator. This animation will help you understanding how this element works.
[Read More]

Download the air treatment equipment configurator software

At SMC International Training, we want to offer you the tools that can be useful in different training environments. We have a software with which you will configure air treatment equipment.
[Read More]

How does a cylinder with lock work?

We have a new animation about a cylinder with lock. This animation will help you understanding how this element works.
[Read More]

Access to the "SMC-113 - Robotics" course from eLEARNING-200

From SMC International Training, we want to provide you free access to the "SMC-113 course - Robotics" for 3 days.
[Read More]

Regulator with Backflow Function Animation

Desde SMC International Training queremos seguir proporcionándote herramientas que te resulten útiles en los diferentes entornos de formación. En esta ocasión queremos hacerte llegar una animación sobre un regulador con función retorno. Gracias a esta animación resulta muy sencillo entender el funcionamiento de este elemento.
[Read More]

Download Your Air Treatment Poster

We developed a detailed poster related to air treatment. The poster includes a visual representation of the different elements used in compressed air treatment as well as their name, pneumatic symbols, and an image of the element section.
[Read More]

Guide Cylinder Selection Software

At SMC International Training, we want to offer you the tools that can be useful in different training environments. We have a Guide Cylinder Selection Software that will help you with your cylinder selection depending on your specific application needs.
[Read More]

Which is the air consumption of a cylinder?

At SMC International Training, we want to offer you the tools that can be useful in different training environments. We have a new animation about the required air flow capacity needed to extend and retract a cylinder.
[Read More]

The best way to understand how these 5/3 solenoid valves work

From SMC International Training, we want to offer you the tools that can be useful in different training environments. We have new animations about two pneumatic circuits for our customers. One of the animations shows a 5/3 closed-centre solenoid valve and the other shows a 5/3 solenoid valve with exhaust centres. These animations will help you better understand the way in which these types of solenoid valves work.
[Read More]

The software to solve pneumatic applications

From SMC International Training, we want to offer you the tools that can be useful in different training environments. We have a selection of software that has an easy to follow structure, which allows users to solve simple pneumatic applications.
[Read More]

Animation about a cylinder with auto switch

From SMC International Training, we want to offer you tools that can be useful in different training environments. This time we want to offer you an animation about a cylinder with auto switch that will allow you understanding in a better way how these type of cylinders works.
[Read More]

How does a 3 position cylinder work?

From SMC International Training, we want to offer you tools that can be useful in different training environments. This time we want to offer you an animation that will allow you understanding and showing in a better way how a 3-position cylinder works.
[Read More]

Download this electric actuator selection software

From SMC International Training, we want to offer you tools that can be useful in different training environments. This time we want to offer you software that will allow you to make the best choice of electric actuator according to working conditions, calculating cycles and load ratios.
[Read More]

How does a refrigerated air dryer work?

From SMC International Training, we want to offer you tools that can be useful in different training environments. This time we want to offer you a new animation to better understanding how a refrigerated air dryer works. You will also see the different parts the process goes through.
[Read More]

Download this animation about Pneumatic circuit for vacuum

From SMC International Training, we want to offer you tools that can be useful in different training environments. This time we want to offer you an animation to better understanding a pneumatic circuit for vacuum.
[Read More]

Take advantage of this software to make vacuum calculations

Download this vacuum selection software! It will let you making simultaneous calculation of absorption time and vacuum break time, the automatic selection of minimum part number, the automatic selection of optimal product group meeting requirements…
[Read More]

Animations to better understanding speed controllers

Download these animations about speed controller to use them as support in different training enviroments.
[Read More]

Access to the SMC-105 course from eLEARNING-200

From SMC International Training, we want to provide you free access to the "SMC-105 course - Solid state" for 3 days.
[Read More]

Learn how pneumatic cylinder cushioning works

Enter and download this animation about pneumatic cylinders cushioning
[Read More]

The most useful unit converter

How many pounds is a kilo? And how many bars is an atmosphere? And how many bits is a byte? And...?? Enter and download our unit converter.
[Read More]

The best way to understand a precision regulator

Download this precision regultor animation!
[Read More]

Access to the SMC-100 course from eLEARNING-200

From SMC International Training, we want to provide you access for free to the SMC-100 course - Introduction to Industrial Automation for 3 days.
[Read More]

Rotatory actuator animations

New animations to download and use as support in different learning environments.
[Read More]

Regulator Booster Animation

As on previous occasions, we include a new animation that you can download and use as support in different learning environments.
[Read More]

New animations!

This time we want to include two solenoid animations that you can download and use as support in different learning environments.
[Read More]

ENERGY SAVING PROGRAM

We want to provide you a download link of energy saving software that will provide a basic understanding of air parameters such as, air consumption, flow rate, pressure, humidity, etc... in factory environments and to increase energy saving awareness with the associated benefits of cost savings and reduced CO2 emissions.
[Read More]

Auto drain NC and NO animations

As we believe that the animations can be useful for you, this time we include two animations of auto drains, one NC and one NO.
[Read More]

Do you know the eLEARNING -200 appearance?

We all know that to be able to develop different technology skills, theoretical knowledge must be acquired first. To reach this, SMC International Training presents the eLEARNING-200 courses. It offers a total of 16 courses based on the automation pyramid, covering technologies in automated systems.
[Read More]

Do you need pneumatic symbols?

We would like to give you this download link. There you will find an extensive library of pneumatic symbology in dxf format.
[Read More]

Actuators animations

Here you have 2 different animations that you can download and use as support in different training environments.
[Read More]