News

Do not forget to visit our booth in Didac India 2017!

During these days, 19th to 21st of September, will take place Didac India 2017, the largest international exhibition for educational products and solutions in Asia Pacific.
[Read More]

Free access to the "SMC-111 – Hydraulics / electro-hydraulics" course from eLEARNING-200

From SMC International Training, we want to provide you free access to the “SMC-111 – Hydraulics / electro-hydraulics” for 3 days.
[Read More]

XXXVIII Automation Journeys - 50th anniversary of the Automation Spanish Committee

Today, September 6th, the XXXVIII Automation Journeys begins. These journeys will take place during the next 3 days at the Conference Hall of Gijón (Spain).
[Read More]

Artificial vision technology in the training equipment MAS-200 – Video

Come in and discover the video about the training system MAS-200 including the artificial vision technology.
[Read More]

The eLEARNING-200 course to acquire theoretical knowledge in DC circuits

Know more about the online and interactive eLEARNING course, SMC-103 – DC Electricity, which will allow you to acquire the necessary theoretical knowledge about DC circuits.
[Read More]

Download this Animation about an Extended Simple Effect Cylinder

Enter the following link to download an animation about the pneumatic simple effect cylinder that is extended in standby position.
[Read More]

Do you know all the possibilities offered by the Product Configurator?

Know more about all the possibilities offered by the Product Configurator of the website: product configurations in few questions, download related documents, request quotation...
[Read More]

The "RoboHopper" project carried out by the University of Technology from Delft

SMC Netherlands sponsors the "RoboHopper" project by the first year students of the Delft University of Technology.
[Read More]

Customized training equipment for the exams in Industrial Automation and Robotics of the German Chamber of Industry and Commerce IHK

The training equipment developed in collaboration with Mercedes-Benz Spain and the AHK (Deutsche Handelskammer für Spanien), which allow the standardization of the Dual Vocational Training title for the Industrial Automation and Robotics cycle to the German framework system.
[Read More]

The eLEARNING-200 course to acquire knowledge on wiring concepts

Know more about the online and interactive eLEARNING course, SMC-106 - Introduction to wiring. It allows to acquire the knowledge in concepts related to wiring.
[Read More]

The graphic difference between NO valves and NC valves

Download this animation of two 2/2 solenoid valves, one normally open (NO) and one normally closed (NC), that will help you to understand the difference between them.
[Read More]

Inauguration of the Customized FMS-200 System with CNC and Laser Marking Technologies in Costa Rica

The inauguration of the laboratory of the National Institute of Learning (INA) was held last June 22 in Heredia, Costa Rica. There the customized FMS-200 training equipment that includes CNC and laser technologies is located.
[Read More]

The most compact and portable pneumatic / electro-pneumatic trainer

Find out more about the compact trainer to help users discover more about pneumatics and electro-pneumatics technologies.
[Read More]

Know more about the HAS-200 system thanks to this video

The HAS-200 system reproduces a production process with a high level of automation. View the following video to know more about this training equipment.
[Read More]

Download this Directional Control Valves Poster

Click on the link below and download this poster! The poster explains the concepts related to pneumatic directional control valves.
[Read More]

Equipment for developing skills in robotic technology

Know more about the systems from SMC International Training's product range for training in robotic technology.
[Read More]

All you need to know about Hydraulics / Electro-hydraulics

Know more about the online and interactive eLEARNING course, SMC-111 - Hydraulics / Electrohydraulics. It allows to acquire the necessary knowledge in hydraulic technology.
[Read More]

The component for PNEUTRAINER to control your circuits

We introduce the new optional component for PNEUTRAINER for data acquisition. It will allow the user to control circuits through autoSIM-200.
[Read More]

Download the Animation about this Complete Vacuum Ejector (ZM)

Download the animation to learn more about how this vacuum ejector works. This vacuum ejector includes a valve and detector in addition to a filter and muffler.
[Read More]

Video about the Customized FMS-200 System with CNC and Laser Marking Technologies

Find out the video of the customized FMS-200 training equipment composed by 10 stations, 3 of them new, which in addition to technologies such as pneumatics, robotics, artificial vision, SCADA or process control, also integrates CNC and laser marking.
[Read More]

Thank you for your visits during GESS Mexico 2017

Last week, from April 26th to 28th, the Global Educational Supplies and Solutions exhibition GESS Mexico 2017 took place in the Pepsi Center, World Trade Center in Mexico city.
[Read More]

GESS Mexico 2017 starts today, come and visit us!

Come over the next 3 days to Pepsi Center, World Trade Center in Mexico City, to the GESS Mexico fair and visit our stand, we are waiting for you!
[Read More]

Thank you for your visits during Worlddidac Astana 2017

SMC International Training really appreciates your visits during Worlddidac Astana 2017, the International Exhibition of technologies for education and professional training.
[Read More]

Valve Manifold Design with Real Industrial Options

Download this software to configure different types of valve manifolds and their options. This configurator will provide you with knowledge and understanding of the real industrial possibilities these types of components offer.
[Read More]

Visit us in Worlddidac Astana 2017

Visit our booth during this week, from April 4 to 6, in the International Exhibition of technologies for education and professional training, Worlddidac Astana 2017.
[Read More]

Robotized Modular Assembly Training System – We adapt to our customers’ needs

In order to offer an equipment for professional training in accordance with industrial reality, SMC International Training has developed a special modular assembly system for instruction on automated and robotized processes.
[Read More]

Thank you for your visits during GESS Dubai 2017

SMC International Training really appreciates your visits during GESS Dubai 2017, where one station of the new product in progress, related to the new trends of Industry 4.0, Smart Factory and Advanced Manufacturing, was exhibited.
[Read More]

Download the 5/3 Closed-Center Valve Animation

At SMC International Training, we want to offer you tools that can be useful in different training environments. This time we offer you the option to download a 5/3 closed-center valve animation.
[Read More]

Spainskills 2017

Last week took place the Spainskills 2017 championship, the Vocational Training competitions of Spain, where the PNEUMATE-200 training equipment was used once again in the Automotive Technology profile test.
[Read More]

GESS Dubai 2017

From 14th to 16th of March, will take place the exhibition GESS Dubai 2017 (Gulf Educational Supplies & Solutions 2017 - Dubai).
[Read More]

Do you know the option to work remote maintenance with the MAP-205 didactic equipment?

Discover the option of integrating a remote communication interface in the MAP-205 didactic equipment. With this device, you will be able to access the PLC remotely and perform necessary remote maintenance tasks over the Internet.
[Read More]

Download This “Pneumatic Actuators” Poster

Enter and download this poster about pneumatic actuators. It includes the most common pneumatic actuators types, a cylinder mounting types and the basic components of a linear actuator.
[Read More]

New PNEUTRAINER-400

PNEUTRAINER-400, the new product for skills development in pneumatics / electropneumatics, is already available.
[Read More]

Do you know the new available components for HYDROTRAINER-200?

SMC International Training extends the range of components available for the HYDROTRAINER-200 - Hydraulic / Electrohydraulic training equipment: Benchtop frame and accessories, Benchtop PLC modules, new control modules…
[Read More]

The INNOBUS runs through different training centers and universities in the Basque Country

During the week of January 9, the INNOBUS from SMC, the vehicle dedicated to innovation, visited different training centers and universities from the Basque Country.
[Read More]

New IT-302 catalogue

The new IT-302 catalogue is already available. Find out the most significant news that you will find in this new catalogue.
[Read More]

Free access to the "SMC-108 – Sensors Technology" course from eLEARNING-200

From SMC International Training, we want to provide you free access to the "SMC-108 – Sensors Technology” for 3 days.
[Read More]

On behalf of SMC International Training best wishes for 2017

On behalf of SMC International Training best wishes for 2017
[Read More]

The handling training systems: MAP-201, MAP-202, MAP-203 & MAP-204

We want to introduce these 4 training systems for handling: MAP-201, MAP-202, MAP-203 & MAP-204. Each of these carries out a simple assembly process by reproducing subsets of more complex processes found in industry.
[Read More]

New electrical actuator component for PNEUTRAINER

We introduce a new optional component with electrica actuator for PNEUTRAINER equipment. This new element makes possible the motion control technology development with the PNEUTRAINER training equipment.
[Read More]

Find out how a single acting pneumatic cylinder works internally

At SMC International Training, we want to offer you the tools that can be useful in different training environments. We have a new animation about a single acting pneumatic cylinder.
[Read More]

Welcome to the world of industrial automation

Learn more about our online eLEARNING-200 courses for knowledge acquisition in different technologies, as well as the chapters and particular characteristics of this course SMC-100 - Introduction to industrial automation.
[Read More]

Discover the new HAS-200 robotic station video!

We would like to introduce the new robotized station for the HAS-200 training system. This station allows the storage of the finished product that is been dispatched in the previous palletizing station.
[Read More]

Thanks for your visits during World Education Days 2016

From November 8 to 10, took place in Bern, Switzerland, the most important exhibition for the sector, World Education Days 2016. Find out the latest developments presented by SMC International Training during this exhibition.
[Read More]

The best way to understand how a rod-less cylinder works

At SMC International Training, we want to offer you the tools that can be useful in different training environments. Our animation about a rod-less cylinder will help you to understand how it works and how this type of cylinder makes its movement.
[Read More]

The “Technology Truck” is already on road

The “Technology Truck” is already on road! This trailer will visit in the next 4 years different technical training centers in Belgium in order to skill students in the latest technologies in the industry 4.0.
[Read More]

We hope to see you next week at World Education Days 2016

Next week, from 8th to 10th of November, global trade fair for educational resources World Education Days will take place in Bern, Switzerland. SMC International Training will be in there as exhibitor.
[Read More]

We customize our training systems to our customers’ needs

We customize our training systems to our customers’ needs. MAS-203 station - Insertion of the bearing customization, adding a bearing charger which supplies raw material to the station.
[Read More]

Find out the skills and technologies that can be developed with IPC-200 training equipment

IPC-200 - Industrial process control, is a fully modular and flexible equipment, comprised of three modules which can work individually or as a complete process line. Enter and discover all the possibilities in skills development that this training equipment offers.
[Read More]

Download energy-saving software

At SMC International Training, we want to offer you tools that can be useful in different training environments. We currently have an opportunity for you to download our energy-saving software.
[Read More]

Thanks for your visits during Didac India 2016

Last week, from the 28th to the 30th of September, took place in Bangalore the the largest international exhibition for educational products and solutions in Asia Pacific, Didac India 2016.
[Read More]

Didac India 2016

For next 3 days, starting today September 28th, will take place Didac India 2016, the largest international exhibition for educational products and solutions in Asia Pacific. SMC International Training will be there as exhibitor, we hope to see you!
[Read More]

Thank you for your visits during the Automation Journeys 2016

As every year, we want to thank your visits to our booth during the XXXVII edition of Automation Journeys (from 7th to 9th of September).
[Read More]

Download this air filter animation

At SMC International Training, we want to offer you the tools that can be useful in different training environments. We have a new animation about an air filter.
[Read More]

FMS-200 video – 8 stations configuration with linear transfer

The FMS-200 didactic equipment is a flexible integrated assembling system for the development in different skills in technologies related with mechatronics / industrial automation. In the following video you can see the working process of an 8 stations configuration FMS-200 system with linear transfer, and its different stations.
[Read More]

XXXVII Automation Journeys

Next week, from September 7th to 9th, will take place in the UCM from Madrid, Spain, the XXXVII Automation Journeys.
[Read More]

The updated version of AUTOMATE-200C - compact version

We want to introduce the updated version of the training equipment AUTOMATE-200 in its compact version: including more SMC technology, making possible a positioning control in closed loop and increasing the sensor types used.
[Read More]

The most visual way to understand the air cushioning

At SMC International Training, we want to offer you the tools that can be useful in different training environments. We have a new animation about a compact cylinder with air cushioning.
[Read More]

Would you know how to detect possible excessive consumption in compressed air installations and suggest actions to prevent it?

The ENS-200 didactic equipment is an energy saving trainer that integrates a series of applications aimed at understanding and implementing the methodology associated with energy saving in compressed air installations.
[Read More]

Acquire the required knowledge of electrical technology with this course

In any learning process we have 2 phases, knowledge acquisition and skills development. In our product range, you will find different training equipment that will allow you to develop skills, and eLEARNING-200 courses that allow you to acquire the necessary knowledge in different technologies.
[Read More]

All the possibilities that our Product Configurator offers

Do you know all the options offered by the Product Configurator from SMC International Training website? Answering few questions you will be able to configure the required product including the options needed.
[Read More]

New complete solution to work on pneumatics / transparent hydraulics

New complete solution with SMC International Training didactic equipment to be skilled in pneumatics / transparent hydraulics.
[Read More]

Free access to the "SMC-103 – DC Electricity" course from eLEARNING-200

3 days of free access to the eLEARNING-200 course SMC-103 – DC Electricity!
[Read More]

Industrial process control special station – SMC International Training adapted to customer needs

In order to meet our customer needs, we have created an adapted IPC-201C system, the production station for the regulation and control of analogue variables of the IPC-200 - Control of industrial processes – training equipment.
[Read More]

Increasing the possibilities – New robot options

There is now available a new robot option to integrate in SMC International Training equipment. This is the Stäubli robot, which you will see integrated in the attached image in the FMS-207: Robotized screwing.
[Read More]

Thanks for your visits during Worlddidac Asia 2016!

SMC International Training really appreciates your visits during Worlddidac Asia 2016, celebrated from June 7 to 9 in Hong Kong.
[Read More]

Download this animation about pneumatic circuit with vacuum generation

At SMC International Training, we want to offer you the tools that can be useful in different training environments. We have a new animation about a pneumatic circuit for a vacuum ejector.
[Read More]

Design, simulate, programming, monitoring and control with autoSIM-200

Do you know that you can design pneumatic, electropneumatic, hydraulic, electrohydraulic, electrical and electronic circuits with autoSIM-200? Apart from designing, autoSIM-200 let you simulating, programming, monitoring and controlling.
[Read More]

Worlddidac Asia 2016 – Hong Kong

SMC International Training will attend as exhibitor to Worlddidac Asia 2016. It will take place in Hong Kong from 7th to 9th of June.
[Read More]

Our Website already available in 4 languages

The SMC International Training Website is already available in 4 languages: Spanish, English, French and German.
[Read More]

New complete solution to work on hydraulics / electrohydraulics

Few months ago we introduced the “Pneumatics / Electro-pneumatics Pack”, the first complete solution provided as a pack. This time we want to offer you a new pack for those users who want to work in the field of the hydraulics / electro-hydraulics.
[Read More]

Select & calculate the performance of our electric solutions

At SMC International Training, we want to offer you the tools that can be useful in different training environments. This time we offer you the option to download the updated version of the electric actuator selector software.
[Read More]

Thanks for your visits during GESS Mexico 2016

SMC International Training really appreciates your visits during GESS Mexico 2016, celebrated from April 20th to 22nd in Mexico.
[Read More]

FMS-206 screws supply station with electric screwdriver

New customization in FMS-200 station made by SMC International Training. Video of the FMS-206 station – Screws supply with electric screwdriver integrated.
[Read More]

GESS Mexico 2016 begins, do not miss it!

Starting today, April 20, 2016 until Friday, April 22, 2016, will be held the second edition of GESS Mexico (Gulf Educational Supplies & Solutions 2016 - Mexico). As last year, the exhibition will take place at the World Trade Center in Mexico City.
[Read More]

Download the non-rotating double power cylinder animation

We have a new animation about a non-rotating double power cylinder. This animation will help you understanding how this element works.
[Read More]

SMC-101 - Principles of pneumatics eLEARNING-200 course

Enter in the SMC-101 - Principles of pneumatics to know the different chapters included in this course and to know dipper the eLEARNING -200.
[Read More]

Andalucía skills 2016

From April 4 to 6, the IV Vocational Training Regional Championship Edition “Andalucíaskills 2016” in the University of Cordoba, in Cordoba (Spain).
[Read More]

Do you know the certification model that SMC International Training offers?

SMC Competence Center is a complete International Certification programme based on the skills development associated to Automation technologies.
[Read More]

How does a Pilot Operated Regulator work?

We have a new animation about a Pilot Operated Regulator. This animation will help you understanding how this element works.
[Read More]

Thanks for your visits during GESS Dubai 2016

SMC International Training really appreciates your visits during GESS Dubai 2016.
[Read More]

Do you know the training equipment CPS-200 - Cards Printing System?

CPS-200 is an automated production system that uses the context of printing smart cards for learning, it is composed of 3 stations. Smart cards are widely used for access control and identification.
[Read More]

GESS Dubai 2016

Next week, from 1st to 3rd of March, will take place the exhibition GESS Dubai 2016 (Gulf Educational Supplies & Solutions 2015 - Dubai).
[Read More]

Download the air treatment equipment configurator software

At SMC International Training, we want to offer you the tools that can be useful in different training environments. We have a software with which you will configure air treatment equipment.
[Read More]

Do you know the training equipment AUTOMATE-200?

AUTOMATE-200 is SMC International Training’s response to the increasing demand for the introduction of a technological culture in training centers. Using a recycling plant for solid urban waste as a reference, a fully modular design system has been developed for a training environment. The integration of the technologies in automated processes brings familiarization to the user of this fascinating world.
[Read More]

New HMI screens used in SMC International Training equipment

SMC International Training updates the HMI screens used in its product range. Find out the new functionalities and benefits added.
[Read More]

Going through northern Spain with SMC INNOBUS

The INNOBUS of SMC goes through the north of Spain visiting different vocational training centers and universities related to automation
[Read More]

All you need to know about vacuum technology

Vacuum is a technology used in an automated system to lift and move products and materials. Like pneumatics, vacuum technology is based upon some of the basic laws of science and physics but with some differences. In any learning process we have 2 phases: knowledge acquisition and skills development.
[Read More]

How does a cylinder with lock work?

We have a new animation about a cylinder with lock. This animation will help you understanding how this element works.
[Read More]

New options for our RFID logistics trainer, LOG-200

This time, the training system LOG-200 that is focused on studying RFID technology in a logistics application, also integrates as an option the Bar Code Reading (BCR) system.
[Read More]

On behalf of SMC International Training best wishes for 2016

[Read More]

Different Universities of Andalucía received the visit of the INNOBUS

During the first week of December, the SMC INNOBUS visited different Universities in Andalucía (Spain).
[Read More]

Access to the "SMC-113 - Robotics" course from eLEARNING-200

From SMC International Training, we want to provide you free access to the "SMC-113 course - Robotics" for 3 days.
[Read More]

NEW COMPLETE SOLUTION TO WORK ON PNEUMATICS / ELECTROPNEUMATICS

With the aim of providing our customers complete solutions already configured, we have developed the “Products pack” idea. The first complete solution defined is the Pneumatic / Electropneumatic pack, for those who want to work on this topic.
[Read More]

COLLABORATIVE ROBOT INTEGRATED IN FMS-200 SYSTEM

It is becoming more and more common in the industry founding a robot working side by side with people without security fence. Those are collaborative robots. SMC International Training, keeping industry as its benchmark, presents the option to include this type of robots in its training systems.
[Read More]

IPC-201C with HMI & IPC-202 with cover turn

Once again, as SMC International Training, we want to strengthen our flexibility in implementing new elements in our systems to meet customer needs. We are now pleased to offer, as an option, the opportunity of including HMI screen in IPC-201C station. On the other hand, we also included in this IPC-200 system, in IPC-202 station, the option of the cover turn while it is being press.
[Read More]

The SMC INNOBUS visited different centers in Galicia

During the last week, from November 9th to 13th, the SMC INNOBUS visited different vocational centers and Polytechnic around Galicia (Spain).
[Read More]

Regulator with Backflow Function Animation

At SMC International Training, we want to offer you the tools that can be useful in different training environments. We have a new animation about a regulator with backflow function. Thanks to this animation, it is very easy to understand how this element works.
[Read More]

3Dsupra video: 3D supervisor for HAS-200

One of the applications included in the HAS-200 training equipment is the 3D supervisor, 3Dsupra. This video shows how this application works.
[Read More]

Working with FAS-200 system to be skilled in mechatronics

Do you know the FAS-200 didactic equipment? It is a flexible and compact assembly system which includes technologies related to industrial automation / mechatronics.
[Read More]

ACTE's CareerTech VISION 2015

During next month of November, from Thursday 19 to Sunday 22, will take place ACTE’s CareerTech VISION 2015 in New Orleans. The event will be held in the Ernest N. Morial Convention Center.
[Read More]

Download Your Air Treatment Poster

We developed a detailed poster related to air treatment. The poster includes a visual representation of the different elements used in compressed air treatment as well as their name, pneumatic symbols, and an image of the element section.
[Read More]

New options for MAP-200 family

Once again, as SMC International Training, we want to strengthen our flexibility in implementing elements and brands in our systems to meet customer needs. This time we offer, as an option, the opportunity of including HMI screens in MAP-200 family. Moreover, we also offer the option to include the TROUB-200 troubleshooting box in the MAP-207 system.
[Read More]

New autoSIM-200 version

The new autoSIM-200 version 4.0 of is now available. This new version is compatible with Windows 8, Windows 8.1, and Windows 10. Among the improvements included in this version you will find...
[Read More]

ENS-200 won the IDA Award 2015 to the INVENTIVE PRODUCT IN EDUCATION

Worlddidac India 2015, the largest international exhibition for educational products and solutions in Asia Pacific, took place from September 9–11 in Bangalore. Winners of the 2015 IDA Awards were announced on Thursday, September 10. The SMC International Training didactic equipment, ENS-200, won the Inventive Product in Education award.
[Read More]

Guide Cylinder Selection Software

At SMC International Training, we want to offer you the tools that can be useful in different training environments. We have a Guide Cylinder Selection Software that will help you with your cylinder selection depending on your specific application needs.
[Read More]

Thank you for your visits during the Automation Journeys 2015

Last week was held the XXXVI edition of the Automation Journeys. We want to thank all the visits that you made to our stand at the University of the Basque Country (UPV / EHU) in Bilbao (Spain).
[Read More]

Worlddidac India 2015 it's here

Next week, from 9 to 11 of September, SMC International Training will be exhibiting at Worlddidac India 2015.
[Read More]

Automation Journeys 2015

The Automation Journeys XXXVI edition, the event that gathers researchers, teachers and students from different Spanish universities in order to discuss topics related to automation.
[Read More]

Acquire the knowledge of the fundamentals about electric motors technology

The SMC-107 eLEARNING -200 course, Introduction to electric motors, will help you understanding the operating principles for basic electrical machines such as direct current and alternate current motors, both single phase and three phase.
[Read More]

Which is the air consumption of a cylinder?

At SMC International Training, we want to offer you the tools that can be useful in different training environments. We have a new animation about the required air flow capacity needed to extend and retract a cylinder.
[Read More]

Pneumatic / Electro-pneumatic standard and personalized compositions

Do you know that PNEUTRAINER-200 is a fully modular and flexible system adaptable to your requirements?
[Read More]

How does the artificial vision technology work?

What is artificial vision? Understand better how this technology works and know one of the SMC International Training equipment that will help you being skilled on it.
[Read More]

Worlddidac India 2015

This year, SMC International Training will be attending Worlddidac India again, the largest international exhibition for educational products and solutions in Asia Pacific.
[Read More]

The best way to understand how these 5/3 solenoid valves work

From SMC International Training, we want to offer you the tools that can be useful in different training environments. We have new animations about two pneumatic circuits for our customers. One of the animations shows a 5/3 closed-centre solenoid valve and the other shows a 5/3 solenoid valve with exhaust centres. These animations will help you better understand the way in which these types of solenoid valves work.
[Read More]

Reach the top of the automation pyramid

The HAS-200 system reproduces a production process with a high level of automation which helps to develop the professional capacities required in diverse sectors (automotive, semiconductors, food, pharmaceutical, etc.).
[Read More]

Training equipment for being skilled in the field of state-of-the-art servo drive and sensor systems

ITS-200 - Innovative Training System is a system that provides professional training in industrial automation, more specifically in the field of state-of-the-art servo drive and sensor systems.
[Read More]

Visit us during this summer in the shows made around the United States

During this summer SMC International Training will be present in the shows made around the United States. You will be able to visit us in our partner’s booth depending on the state where the show takes place.
[Read More]

The software to solve pneumatic applications

From SMC International Training, we want to offer you the tools that can be useful in different training environments. We have a selection of software that has an easy to follow structure, which allows users to solve simple pneumatic applications.
[Read More]

Access to all eLEARNING-200 available courses with each license

eLEARNING-200 has changed. Now, each license, without taking into account the language or license type, gives access to all available courses. This access allows the user to complete all of the required courses during the validity of the license.
[Read More]

Inauguration of the Automotive Vocational Training Center from Catalonia

Last March took place the opening of the Automotive Vocational Training Center from Catalonia located in Martorell. The center has the support of the Automotive Industry of Catalonia Cluster, which integrates companies such as SEAT, NISSAN, GESTAMP, etc.
[Read More]

Need to be skilled in hydraulics and electrohydraulics?

Among our product range you can find 2 specific products to be skilled in hydraulics and electrohydraulics: HYDROTRAINER-200 and HYDROMODEL-200.
[Read More]

Spainskills2015

From May 5th to 9th took place in Madrid the championship Spainskills 2015, the vocational training competitions from Spain. SMC International Training has participated in these competitions as a partner.
[Read More]

Animation about a cylinder with auto switch

From SMC International Training, we want to offer you tools that can be useful in different training environments. This time we want to offer you an animation about a cylinder with auto switch that will allow you understanding in a better way how these type of cylinders works.
[Read More]

More possibilities - Vision system in MAS-200

We are pleased to introduce the option of integrating a vision system in our didactic equipment MAS-200. This system allows the rejection of the fabricated product if its characteristics are not the selected ones. With this system, the artificial vision technology is incorporated as an option in the MAS-200 system when the customer needs require.
[Read More]

Thanks for your visits during GESS Mexico 2015

SMC International Training really appreciates your visits during GESS Mexico 2015, celebrated from April 15 to 17 in Mexico City.
[Read More]

The Queen of Spain visits the Artillery Academy of Segovia

Last April 13, 2015 the Queen of Spain visited the classrooms of the Artillery Academy of Segovia, where there are several SMC International Training systems.
[Read More]

How does a 3 position cylinder work?

From SMC International Training, we want to offer you tools that can be useful in different training environments. This time we want to offer you an animation that will allow you understanding and showing in a better way how a 3-position cylinder works.
[Read More]

GESS Mexico 2015

From 15th to 17th of April will take place the exhibition GESS Mexico 2015. SMC International Training will be there as exhibitor. This year, the fair will be take place in Mexico City, in the World Trade Center. Our location in the event will be stand 501. We hope to see you in there!
[Read More]

Thanks for your visits during Worlddidac Asia 2015

SMC International Training really appreciates your visits during Worlddidac Asia 2015, celebrated from March 18 to 20 in Hong Kong.
[Read More]

Inauguration of "SMC COMPETENCE CENTER TECHNIFUTUR" in SERAING

On March 12, 2015 took place the official opening of "SMC Competence Centers Seraing".
[Read More]

Have you already downloaded the electric actuator selection software?

We want to offer you software that will allow you to make the best choice of electric actuator according to working conditions, calculating cycles and load ratios.
[Read More]

Worlddidac Asia 2015 – Hong Kong

From 18th to 20th of March will take place the exhibition Worlddidac Asia 2015. SMC International Training will be there as exhibitor.
[Read More]

Thanks for your visits during GESS Dubai 2015

SMC International Training really appreciates your visits during GESS Dubai 2015, celebrated from February 24 to 26 in Dubai, United Arab Emirates.
[Read More]

Understand better our didactic equipment IPC-200 - Industrial process control

Enter to see the new video about our didactic equipment IPC-200 - Industrial process control
[Read More]

GESS Dubai 2015

Next week, from 24th to 26th of February, will take place the exhibition GESS Dubai 2015 (Gulf Educational Supplies & Solutions 2015 - Dubai).
[Read More]

New animation - Refrigerated air dryer

From SMC International Training, we want to offer you tools that can be useful in different training environments. This time we want to offer you a new animation to better understanding how a refrigerated air dryer works. You will also see the different parts the process goes through.
[Read More]

SMC International Training offers more customization

Enter the following news link and discover the customization of the FMS-200 equipment with extra security systems at customer’s request.
[Read More]

Discover the video from MAS-200 system - Modular Assembly System

Enter to discover the video that shows how MAS-200 system works. MAS-200 is a modular training system which emulates a real industrial assembly process, incorporating the technologies required by today’s automated industry.
[Read More]

Discover the eLEARNING-200 course SMC-109 - Programmable Controllers!

Run through the different types of Programmable Controllers (PLC), understand how a Programmable Controller works, its general structure, general concepts of programming and possible applications for these devices.
[Read More]

New animation available - Pneumatic circuit for vacuum

From SMC International Training, we want to offer you tools that can be useful in different training environments. This time we want to offer you an animation to better understanding a pneumatic circuit for vacuum.
[Read More]

More possibilities - Universal Robot UR-5

We are pleased to introduce the option of integrating a UNIVERSAL ROBOT in the SMC International Training product range. This is a collaborative robot type, so it is not necessary to include additional safety systems in any case.
[Read More]

On behalf of SMC International Training best wishes for 2015

On behalf of SMC International Training best wishes for 2015
[Read More]

After-sales service inquiry

It is already available the option to send us an "after sales service" inquiry through our contact us link on the Website.
[Read More]

Download this vacuum selection software!

From SMC International Training, we want to offer you tools that can be useful in different training environments. This time we want to offer you vacuum selection software.
[Read More]

Everything what you need to know about Process Control Systems

Do you want to know everything about Process Control systems? Enter and discover our related eLEARNING-200 course.
[Read More]

PNEUMATE-200 for the Vocational Training Championship in the Automotive Technology profile

SMC International Training is glad to congratulate the winners of the Regional Championship in Vocational Training, Castilla-La Mancha 2014, which was celebrated last Friday, November 28, 2014.
[Read More]

Regional Championship in Vocational Training, Castilla-La Mancha 2014

This Friday, November 28, will take place the Regional Championship in Vocational Training, Castilla-La Mancha 2014, in the Automotive Technology profile.
[Read More]

New EdMES v4.0 for HAS-200

The new EdMES v4.0 for HAS-200 system - Highly Automated System is now available. Discover the new features included!
[Read More]

Animations about speed controllers

Download these animations about speed controller to use them as support in different training enviroments.
[Read More]

Thanks for your visits during Worlddidac Basel 2014

SMC International Training really appreciates your visits during Worlddidac Basel 2014, celebrated from October 29 to 31 in Basel, Switzerland.
[Read More]

More flexibility - new Robot options

The option of integrating a YASKAWA MOTOMAN robot in SMC International Training systems is now available.
[Read More]

Worldiddac Basel 2014

From October 29 to October 31, SMC International Training will be present, one more year as exhibitor, in Worlddidac Basel 2014, the global trade fair for educational resources.
[Read More]

Access to the SMC-105 course from eLEARNING-200

3 days of free access to the eLEARNING-200 course SMC-105 - Solid state!
[Read More]

Thanks for your visits during Worlddidac India 2014

SMC International Training really appreciates your visits during Worlddidac India 2014, celebrated during September in New Delhi, India.
[Read More]

Inauguration of the SMC Competence Center of Popayan

On 26th of August 2014 the SMC Competence Center from the Industrial Production and Telecommuting SENA Regional Cauca (Popayan) Center was inaugurated.
[Read More]

REQUEST A QUOTE WITHOUT COMMITMENT!

The option "Quotation request" is now available in the Product Configurator area of our website.
[Read More]

Animation about pneumatic cylinder cushioning

Enter in the Instructor Portal and download the animation about pneumatic cylinders cushioning.
[Read More]

XXXV Automation Journeys – 2014 (Valencia – Spain)

SMC International Training really appreciates your visits during the XXXV Automation Journeys held in Valencia (Spain) last week.
[Read More]

SMC International Training in Worlddidac India 2014

From 10th to 12th of September, Worlddidac India 2014 will be hosting the largest international exhibition for educational products & solutions in the Asia Pacific region.
[Read More]

Automation journeys CEA 2014

Next week, from September 3rd to 5th, will be held in Valencia (Spain) the XXXV edition of the Automation Journeys CEA 2014.
[Read More]

FAS-200 didactic equipment, the flexible and compact assembly system (VIDEO)

Enter to see the FAS-200 video, the flexible and compact assembly system which includes technologies from the automation industry / mechatronics.
[Read More]

Download the most useful unit converter

How many times have you wondered how many pounds is a kilo? And how many bars is an atmosphere? And how many bits is a byte? And...??
[Read More]

All the skills and technologies to be developed with MAS-200

Can I develop sensor skills with MAS-200 training system? And robotics? And PLC? And...? Yes!
[Read More]

Become familiar with the fascinating world of sensors and transducers used in industry!

For what are used sensors? What types are there? Which are their symbols?
[Read More]

SMC International Training is proud to be a new Worlddidac member

SMC International Training is Worlddidac member, the global trade association for companies providing products for education and training at all levels.
[Read More]

New animation to download in the Instructor Portal

Enter and download the new available animation about a precision regulator
[Read More]

The RFID logistics trainer

Enter to see the LOG-200 video, the didactic equipment which includes RFID technology within the context of a logistics application.
[Read More]

The potential of the 3D automation software, autoSIM-200.

During the presentation of the professional module “Mechatronic Systems Simulation" in last year’s Innotek, held in TKNIKA in June 2013, was agreed one course. This course was held last week.
[Read More]

3D applications for SMC International Training equipment

SMC International Training has a series of 3D applications from real equipment, ready to be run in the system.
[Read More]

Access to the SMC-100 course from eLEARNING-200

3 days of free access to the eLEARNING-200 course SMC-100 - Introduction to Industrial Automation!
[Read More]

Regulate and control analogue variables with IPC-201C

Regulate and control TEMPERATURE, LEVEL, PRESSURE AND FLOW variables with IPC-201C.
[Read More]

The transparent Hydraulics - Electro-hydraulics (video)

Do you know the didactic equipment HYDROMODEL-200? In the following video you will be able to see a small example of this equipment that meets the training needs related with technology of hydraulics in a very visual way.
[Read More]

PNEUMATE-200 for the AUTOMOTIVE technicians training

SMC International Training is glad to congratulate the winners of the XI edition of the Competition for Young Automotive Technicians.
[Read More]

XI edition of the Competition for Young Automotive Technicians

On Thursday and Friday, 22nd and 23rd of May, will take place the XI edition of the Competition for Young Automotive Technicians in the Mercedes-Benz Training Centre of Azuqueca de Henares (Madrid-Spain).
[Read More]

And ... how are the eLEARNING-200 courses?

Enter in the DEMO link of the eLEARNING-200 and you will see how the courses are and be able to interact with them.
[Read More]

Vocational Training Regional Championship “Cantabriaskills 2014”

From 13th to 16th of May, the Vocational Training Regional Championship “Cantabriaskills 2014” will take place on IES Augusto G. Linares campus, Santander (Spain).
[Read More]

Elmia Automation 2014

During next week, from 6th to 9th of May, will take place in Jönköping (Sweden), the automation exhibition Elmia Automation 2014.
[Read More]

Download new animations!

You can now download new animations to use as support in different learning environments.
[Read More]

New Allen Bradley controller models and Ethernet IP communication

We are pleased to announce that we have upgraded the standard Allen Bradley PLC’s used in the SMC International Training product range.
[Read More]

Get all the product information you want with just one click!

Thanks to the Product Configurator, with just a few and quick steps you can configure the SMC International Training product you want.
[Read More]

HAS-200 system helps creating High-Tech, High-Skilled Manufacturing Jobs in Florida

Enter and discover the Science Nation published video, which takes a look at what industry and educators in Florida are doing to prepare a high-tech, high-skilled workforce in Florida.
[Read More]

Congratulations to the winners!

SMC International Training is glad to congratulate the winners of the Regional Vocational Training (VET) Championship of Andalucía, in Industrial Control profile. In this profile competition the MAP-207 didactic equipment was used.
[Read More]

Andalucíaskills 2014

Today, March 18, 2014, begins the III Vocational Training Regional Championship Edition “Andalucíaskills 2014” that will last until next Thursday, March 20. SMC International Training will be as partners to the Industrial Control competition.
[Read More]

Thanks from GESS 2014

Thank you for your visits during the Gulf Education Conference & Exhibition in Dubai!
[Read More]

Winner of the Web competition

Congratulations to Paul Warmington! Paul, Program Manager for Work Based Learning of Cambridge Regional College, has won our Web competition. Starting today and throughout a year, he will enjoy a eLEARNING-200 license for the SMC-101 course SMC Pneumatic Technology.
[Read More]

GESS – Gulf Educational Supplies & Solutions 2014

Next week, from 4 to 6 March, will take place the exhibition GESS 2014 (Gulf Educational Supplies & Solutions) of Dubai.
[Read More]

Don’t forget to participate!

Next March 3 we will publish the winner of the licence for the pneumatics course of eLEARNING-200
[Read More]

ENERGY SAVING IN FMS-200

The ALDS is an automatic leak detection system that SMC offers as an energy saving solution.
[Read More]

What do you know about robotic systems?

eLEARNING-200 has a course focused on robotics which enables you to learn much more about these systems.
[Read More]

SMC Competence Center

Do you know our Competence Center model? A Complete International Certification programme based on the skills development associated to Automation technologies.
[Read More]

New Web Competition - eLEARNING-200 pneumatic course

Do you want to acquire theoretical knowledge about pneumatic technology? If so, take part in our new web competition! You can win a license for one year for the eLEARNING-200 course, SMC-101 - Principles of Pneumatics
[Read More]

Skills development in different technologies

In each product page on our website you will find a table of skills / technologies that shows which skills in which technologies can be developed with that product.
[Read More]

ARTIFICIAL VISION TECHNOLOGY

Within our wide range of products you will find multiple equipments that allow you developing different skills in artificial vision technology.
[Read More]

Best wishes for 2014!

Of behalf of SMC International Training best wishes for 2014
[Read More]

AUTOMATE-200 - Welcome to the world of automation

AUTOMATE-200 is SMC International Training’s response to the increasing demand for the introduction of a technological culture in training centers. Using a recycling plant for solid urban waste as a reference, a fully modular design system has been developed for a training environment. This equipment is available in 3 different versions.
[Read More]

Know better SMC Corporation

SMC Corporation is world leader in producing and supplying automation and pneumatic components, with over 50 years of experience, working in over 75 countries.
[Read More]

Tech Industry 2013 (Riga - Latvia)

Last week, between December 5 and 7, took place the international exhibition Tech Industry 2013, the year’s biggest event for industrial production in the Baltic Region.
[Read More]

Winner of the Web competition

Congratulations to Carola Reinmueller! Carola, student of University of Applied Sciences Technikum Wien, has won our Website competition. She will receive the $150 gift card for Amazon.com.
[Read More]

Do not forget to participate!

We remind you that next Monday, December 2, we will post the winner of the Web competition. Enter to participate!
[Read More]

Thank you from Instrutec 2013

Thank you for your visits during the Instrutec 2013 (Tallinn – Estonia)!
[Read More]

Instrutec 2013 in Tallinn (Estonia)

From tomorrow, November 13 until Friday, November 15, takes place the 19th Tallinn’s International Fair Instrutec 2013 (Estonia).
[Read More]

autoSIM-200 3D applications - Video

SMC International Training has a series of 3D applications from real equipment, ready to be run in the system. See in the video how autoSIM-200 works with SMC International Training applications, the graphics and programming possibilities.
[Read More]

Do you know the Instructor Portal section?

A section where users dedicated to training will find interesting and useful material for use as support in different learning environments: animations, links, articles ...
[Read More]

Web Competition

Do you want to win an Amazon gift card? To participate in this draw for $150 gift card from Amazon.com, we ask that you tell us your favorite product from the SMC International Training range through the "Contact" section of our Website, choosing the subject line “Web Competition".
[Read More]

ENS-200, the best way of teaching about energy efficiency in compressed air facilities!

ENS-200 is an energy saving trainer which integrates a series of applications (vacuum, actuators and blowing) aimed at understanding and implementing the methodology associated with energy saving in compressed air installations.
[Read More]

Didactic fair “Exhibition of new technologies” (Belgium)

During these last weeks SMC International Training has been present in various fairs and events in different parts of Belgium. In the picture on the left you will see an example of the didactic fair "Exhibition of new technologies" held last October 2 at the Sainth-Joseph Institute of Ciney (Belgium).
[Read More]

autoSIM-200 still growing

AutoSIM-200 includes a new driver which allows the user to establish a communication between autoSIM-200 and the simulator of the Schneider-Electric software PLC, Unity Pro S. This communication is perfect to test their applications developed with the Unity Pro S software through 3D simulations in autoSIM-200.
[Read More]

For the third year running SMC is among the 100 most innovative companies in the world by Forbes.

For the third year running SMC is among the 100 most innovative companies in the world by Forbes. Companies like Apple, Unilever, Adidas, are with SMC in this coveted list. SMC is placed in the position 61.
[Read More]

Thanks to all the attendees to the Electrical and electronic Journeys

Thanks to all the attendees to the Electrical and electronic Journeys celebrated during last week in Pontevedra (Spain). It has been really successful. We hope to see you in future events!
[Read More]

XXXIV Automation Journeys - 2013

SMC International Training really appreciates your visits during the XXXIV Automation Journeys. See you next time!
[Read More]

Electrical and electronic Journeys 2013 - Pontevedra (Spain)

As you will see in SMC International Training agenda, the 10th and 11th of September will take place electrical and electronic journeys organized by the Training and Resource Center of Pontevedra (CFR Pontevedra). SMC International Training will collaborate with a seminar on Tuesday 10th - "Regulation and control in automated industrial systems."
[Read More]

XXXIV Automation Journeys - 2013

Next week, on 4, 5 and September 6, the XXXIV Automation Journeys - 2013 - will take place in UPC Terrassa, Terrassa (Barcelona - Spain). SMC International Training will be there as partners and exhibitors.
[Read More]

FAS-200 - Flexible assembly system

FAS-200 is a flexible and compact assembly system which includes industrial automation technologies. FAS-200 comprises up to 18 independent stations with integrated control. This modular equipment features a higher number of stations in the same space, which means that more users will be able to work at the same time.
[Read More]

Download the poster designs of the SMC International Training product range

After configuring a product through the product configurator, you are able to view and download information about it. Between these options you will find the posters of the SMC International Training product range.
[Read More]

eLEARNING-200 - The perfect theory companion

To be able to develop different technology skills, theoretical knowledge must be acquired first. SMC International Training presents the eLEARNING-200 course programme: the perfect complement to our didactic equipment. eLEARNING-200 offers a total of 16 courses based on the automation pyramid, covering technologies in automated systems.
[Read More]

Solve your doubts about autoSIM-200

For those who already have autoSIM-200, we want to provide you some tutorials that will help you with the use and management of this software.
[Read More]

The Hydraulics - Electro-hydraulics from the inside

Many of you will not know yet one of the most innovative products of the SMC International Training range: HYDROMODEL-200. HYDROMODEL-200 meets training needs for technology related to hydraulic components in a very visual way. The parts are made up of a transparent methacrylate body with internal industrial metal parts. Using this system, it is possible to see inside the components as they operate, becoming familiar with them and understanding how they work.
[Read More]

SMC International Training new catalogue!

The new catalogue IT-300 includes the full range of products offered by SMC International Training, as well as introducing the new products that until now were not in previous catalogues. You can download those chapters in which you are interested in "Products".
[Read More]

Do you know the product configurator?

Through the product configurator integrated in the new Web, you can configure in a few and easy steps the desired product from the range of SMC International Training.
[Read More]